LanguageY-Shaped 3-Way Ball Valves (Y300 type)
This valve is suitable for highly abrasive fluid such as powder and/or slurry, high viscosity fluids and for passing pig etc. for cleaning inside of piping.
Y-Shaped 3-Way Ball Valves (Y300 type)
 |  |
| Manual valve Y300 type | Pneumatically Operated Valve (double-acting) YWN1300 type |
Features
①Body shape of the wide angle
A wide angle of 135°compared with 90° bend angle of a general 3-way ball valve enables the passage of a pig or sphere for cleaning in a pipe.
②Optional mounting position
There are two types of flanges: straight type and 22.5° bent. Various patterns can be selected by combining these two types of flanges in any three places.
③Ball
The ball and stem are fixed and there is no deviation in opening due to backlash between the ball and valve shaft. In addition, since the radius of curvature of the ball port is 1.5 times or more of the bore diameter, pressure loss is small, and in the case of a highly abrasive fluid, the damage of the ball is less than that of a general 3-way valve.
④Primary sealing mechanism
Spring (cushion rubber for DN100 and metallic spring for DN125 and larger) is provided at the back of the seat, so it is excellent in sealing even if there is temperature-cycle and pressure-fluctuation. The sealing is performed by the seat on the primary side (inlet side). Therefore, the function deterioration due to the inflow of fluid into the pocket part can be reduced.
⑤O-ring seal
Since O-rings are used for the sealing parts, the sealing performance is stable and no periodic retightening is required.
⑥Stable bearing function
Bearings made of specially reinforced PTFE are mounted on the upper and lower shafts of the ball to prevent galling and withstand high-frequency operation.
⑦Purge hole
Two purge holes are provided in the main body to prevent fluid from stagnating c by air charging to the pocket, leak check against seat wear, and purge of fluid remaining in the pocket.
Main applications
Solid materials such as powder, slurry, pellets, etc., shield method, etc.
Main unit specifications
Y300 type (DN25-300)
Body material | Ductile iron Cast iron: FCD400(DN65 or higher) Stainless steel Cast steel: SCS13A(CF8), Optional: SCS14A, SCS16A |
Connection method | Flanged JIS10K*1 CL (ASME, JPI)150 *2 |
*1:JIS B2220 *2:ASME B16.5
Seat specifications
Seat material | Reinforced PTFE seats, Semi-metal seats (SM), Metal seats (ST) |
*Not compatible with 2-way ball valve (F100NB type) seats.
*Semi-metal seats and metal seats are available as options. Hardening treatment is applied to the ball surface.
Please refer to the catalog, drawings, etc. or contact our sales representative for the details.
